Pneumatic ceramic feed valve, ceramic pneumatic double gate valve product overview:

The ceramic feeding valve adopts structural ceramics as sealing pairs, which has the advantages of erosion resistance and good abrasion resistance. Open double gate seal structure, opening and closing process, gate spin, polishing, self-cleaning function, two-way sealing valve closed, flexible opening and closing. According to different working conditions, it can be equipped with blowing port and automatic purging system. It is suitable for the transportation of dry ash, slag slurry, material and other mediums, with little ash accumulation and no jam, simple maintenance and long service life.

Pneumatic feeding ceramic valve, ceramic pneumatic double gate valve of the valve is mainly used in power plant ash system of ash and slag feeding opening and closing, also suitable for mining, lime factory, cement plant dust medium wear and corrosion of the feed opening and closing. The valve has the advantages of good sealing performance, high temperature resistance, strong wear resistance, flexible opening and closing, no dust jam and ash accumulation, long service life, etc..

The main part of the wear-resistant ceramic feed valve is made of cast iron, cast iron and wear-resistant ceramics.

The use of temperature are less than 250.

The nominal pressure of the actuator is 0.4 ~ 0.6Mpa, and the nominal pressure of the valve is 1Mpa.

Can also be customized according to user requirements.

The installation instructions for the discharge valve:

You are welcome to use our patented products. In order to prolong the service life and improve the work efficiency, the valve is installed as far as possible. Under conditions that are not allowed, 45 degrees. In case of flip or horizontal loading, the empty delivery time must be extended to avoid the valve volume. The valve return to the fast, using import inductance, magnetic switch two-wire system, through the load fast line can adapt to DC, AC can. "Install the" fast "number as shown in figure"

Installation and application points

1. Read the instructions carefully before installing, and check the valve type, path and technical parameters.

2, do not install the valve after the application of welding flange, so as not to damage the valve sealing ring. The valve should be installed at the proper distance from the pipe, and the flange should be lined with gaskets.

3, two pipeline center and valve diameter center should be kept coaxial, flange surface should be smooth, not allowed to have greater deflection flange surface, in order to ensure the clamping and normal work of the valve. Tightening bolts shall be uniformly symmetrical.